Polymaker Matte PLA for Production 1.75mm

Matte PLA is the cost-effective PLA material for end use products which will be used in real world conditions: weather resistance, chemical resistance and the filament has already passed the food safety tests.

HIGHLIGHTS:

• High speed Matte PLA
• Great weather resistance, on par with ASA
• Good chemical resistance for all-purpose cleaner
• Food contact safe *

HIGH SPEED:

• High volumetric flow of up to 24 mm³/s
• Confidently print up to 300 mm/s (hardened nozzle recommended)
• Matte surface finish

WEATHER RESISTANCE:

• Weather resistance on par with ASA
• Indoor/outdoor use (Temperature, Moisture & UV rays)
• 15-45 ℃

HIGH SPEED:

• High volumetric flow of up to 24 mm³/s
• Confidently print up to 300 mm/s (hardened nozzle recommended)

CHEMICAL RESISTANCE:

• Resistant to water
• Highly Resistant to chemicals with a low acidity (≈ pH < 7)

Test Method:

FOOD CONTACT SAFE:

• The material does not deteriorate when it comes into contact with food, therefore, it is food safe as a material * .
• No chemicals will be released in the food, although bacteria might build up in the print itself, but this is not a material issue.

PRINTER SETTINGS:

• Nozzle temperature - 200 – 230 (℃)
• Build surface treatment - Glue, Magigoo
• Build plate temperature - 25- 60 (°C)
• Cooling fan Turned - On
• Printing speed - 60-150 (mm/s)
• Raft separation distance - 0.2 (mm)
• Retraction distance - 1 (mm)
• Retraction speed - 20 (mm/s)
• Recommended environmental temperature - Room temperature - 60 (°C)
• Threshold overhang angle - 60 (°)
• Recommended support material - PolySupport™ and PolyDissolve™ S1

NOTE: The above settings are based on 0.4 mm nozzle and Simplify 3D v.3.1. Printing conditions may vary with different nozzle diameters.

Making 3D Possible!

• Matte_PLA_TDS_Template_V5.0_1_2
• Matte_PLA_SDS_EU_EN_V1_2