xTool
xTool Fire Safety Set for S1
We have 3 in stock.
xTool Fire Safety Set for S1
EC3D Winkel - Maarssen, Utrecht
Gageldijk 2
Unit B2
3602 AL Maarssen
Netherlands
xTool S1 Fire Safety Set IS THE World's First Full Auto Fire Safety Set for Desktop Laser.
Fire accidents triggered by laser has been the concern of the whole industry. As one of the leading companies in laser industry, xTool is fully aware of your concerns and decide to be the pioneer in minimizing the possibility of Laser-Triggered Fire. Thus, xTool have brought this to the industry: Full Auto Fire Safety Set for Desktop Laser
Fire Detection & Alarm:
- Control Box
- Sensor Hub
- Sensors
Fire Suppression & Power Cut:
- Control Box
- Gas Bottle
- Air Tube
- Smart Switch
Note: This product must be used in a enclosed space. For example, xTool D1 series need to be used with xTool Enclosure.
Auto Flame Detection:
By using 5 fire detection sensors and integrated algorithms of light, temperature, and position inside the enclosed laser, xTool Fire Safety set is sensitive to any possible dangers of fire.
Auto Alarm Triggering:
Immediately after it detects fire, xTool Fire Safety Set will automatically trigger the alarm, warning users of the fire by continuous "beeping" sounds. You can stop the alarm by pushing a button on it, if you want to deal with the fire in your own way.
Auto Power Cut:
To prevent further exacerbating the burning fire and protect the laser machine from fire, the smart switch of the xTool Fire Safety Set will shut down the working laser automatically in a few seconds after the alarm sounds.
IMPORTANT: xTool Fire Safety Set cannot guarantee 100% safety in fire accidents.
Please use the laser machine according to its guide and do not leave the machine during processing.
Compatibility:
Apply to all lasers that is in < 0.13 m3 enclosed space
Open Machine with an Enclosure:
Use a cover to keep the working space enclosed. As long as the enclosed space is under 0.13m3, xTool Fire Safety Set can extinguish the fire effectively.
Enclosed Machine:
Enclosed machine that has the working space up to 0.13m3 can work with xTool Fire Safety Set. (Be aware that an air tube is needed to put into the enclosed space for it to work)
Making 3D Possible!
