3DLAC Adhesive Spray for 3D Printing - 400ml

3DLAC is an adhesive spray based on ultra fast drying thermoplastic copolymers designed to fix the FFF/ FDM 3D printing parts and its formula helps to prevent  warping.

FEATURES:

• High level of fixation
• Easy Application
• Covers large surfaces
• Works on multiple surfaces
• Cleaning with water
• Quick drying
• Long lasting - 400 uses
• Multi-materials

APPLICATION: 

3DLAC can be applied on a multitude of materials, on which you want to print with 3D printers. Depending on the materials will be achieved different adhesions so we advise before printing large parts concerts technical materials prior tests are made. A greater amount of Spray if it helps the fasteners are stronger. When removing the pieces take special care as it does, we recommend let cool the surface and if necessary, give the piece a light touch to release easily.

DIRECTIONS FOR USE:

• CLEAN - Ensure that your 3D printer’s build plate is clean and free from any debris or residue.
• SHAKE - Shake the 3DLAC can well before use.
• APPLY - Hold the can upright and at approximately 20-30 cm from the build plate. Apply a thin, even coat of 3DLAC Spray onto the build plate, covering the entire desired printing area. Wait for a few seconds to allow the adhesive to dry and become tacky.
• PRINT - Start your 3D printing process, knowing that your print will securely adhere to the build  plate.
• REMOVE - Once the print is finished and the surface has cooled, easily remove your printed object.

PHYSICAL PROPERTIES:

• Binders: Thermoplastic
• Colour: Transparent 
• Brightness (ASTM D-523 ISO 2813): Not applicable
• Touch drying (ASTM D-1640 ISO 1517): 10”
• Total drying (ASTM D-1640 ISO 1517): 1”
• Dry film thickness (ASTM D-823 ISO 2808): 15μ /layer
• Adhesion (ASTM D-3359 ISO 2409): 4 B
• Theoretical yield: 2 m2
• Thinner: isopropyl alcohol
• Product lifetime: > 5 years 
• Over-application: Yes
• Heat resistance: 200°C

RECOMMENDATIONS:

Store in a cool dry place away from direct sunlight. After each use keep the cap on.

Making 3D Possible!