Magigoo® PA

MAGIGOO PA: The Professional's Choice for Polyamide 3D Printing

MAGIGOO PA is a specialized adhesive designed exclusively for professional 3D printing with Polyamide (PA) filaments. It's the solution you need for printing with nylons, which are known for their high strength, toughness, and chemical resistance but can be challenging to work with due to warping and poor bed adhesion.

This adhesive works with a wide range of PA types, including PA12, PA6,6, and PA6, as well as fiber-reinforced varieties. It ensures your prints stick firmly to the bed during printing and are easy to remove once the bed cools down.

How to Use:

1. Shake the bottle well.
2. Press the nib onto the print bed to activate the inner valve and spread a thin, even layer over the print area.
3. Print following the recommendations from your filament or printer manufacturer.
4. Wait for the print to cool down—the part should be easy to remove.
5. Clean the residue from the print bed with a damp cloth.

For larger prints, we recommend using a 20 mm brim. If you experience over-adhesion, simply wet the print bed with a small amount of water and slowly work it under the part to make removal easier.

Safety Note: This product is designed specifically for PA filaments. Using it with other filament types may cause over-adhesion and damage your print surface.

Together, Layer by Layer!

• Magigoo PA TDS.pdf
• Magigoo Manual.pdf