Magigoo
Magigoo Pro HT- The 3D Printing Adhesive
We have 1 in stock.
Magigoo Pro HT- The 3D Printing Adhesive
EC3D Winkel - Maarssen, Utrecht
Gageldijk 2
Unit B2
3602 AL Maarssen
Netherlands
WHAT:
MAGIGOO HT is designed for professional use, to work at high printing temperatures. The part should be relatively easy to remove once it cools and the glue residue should also be easily cleaned off.
WHY:
High temperature materials such as PEEK are advanced engineering thermoplastics which offer improved mechanical and chemical stability at elevated temperatures when compared to regular thermoplastics. Other materials include PEKK, Ultem and PPSU and their carbon/glass fibre reinforced counterparts. Owing to their high temperature and other exceptional properties these materials are highly sought after in high temperature and high-performance engineering applications such as in the automotive and aerospace industries. Additionally, these materials are also sought after in the chemical, petrochemical, medical and research applications. High temperature filaments prove to be challenging materials for FDM printing due to their higher tendency to warp. These materials are generally printed at elevated temperatures owing to their high temperature properties. MAGIGOO HT is a specialized solution for FDM printing of PEEK filaments which was developed to work at elevated printing temperatures.
HOW:
MAGIGOO HT has been designed and tested to work with build-plate temperature of 150 °C or lower.
SHAKE THE BOTTLE.
- Apply to the desired area by pressing the nib on the bed (activating the inner valve) and spreading as needed.
- Print according to the filament/printer manufacturers recommendations.
- Allow to cool and remove.
- The print should pop right off.
- Clean - Use a damp cloth to wipe off.
SAFETY:
Using this product with other than PC type filaments might cause over adhesion and damage your build surface.
TIPS:
For larger prints a 20 mm brim with multiple layers is recommended. In cases of excess adhesion, it is recommended to wet print bed with a small amount of water slowly work it below the part, this should make part removal easier.
Making 3D Possible!
