Polymaker PC-ABS 1.75mm

Polymaker™ PC-ABS is a PC/ABS polymer blend which offers excellent toughness and heat resistance while displaying a good surface finish and good compatibility with metal electroplating. Polymaker™ PC-ABS characteristics make it ideal for automotive interior parts such as dashboard, door handles or instrument panels.

WHAT IS THE HEAT RESISTANCE OF THIS FILAMENT, LIKE THE HEAT DEFLECTION TEMPERATURE?

Polymaker™ PC-ABS is a very excellent heat-resistant product, the Vicat temperature is about 140℃, the heat deflection temperature is under 0.45MPa around 110℃

RECOMMENDED PRINTING CONDITIONS:

• Nozzle temperature - 250-270 (˚C)
• Build Surface material - BuildTak®
• Build plate temperature - 90-110 (˚C)
• Cooling fan Turned - off
• Printing speed - 40-60 (mm/s)
• Raft separation distance - 0.2 (mm)
• Retraction distance - 1-3 (mm)
• Retraction speed - 60 (mm/s)
• Recommended environmental temperature - 80 (˚C)
• Threshold overhang angle - 45 (˚)
• Recommended support material PolyDissolve S2

Based on 0.4 mm nozzle and Simplify 3D v.3.1. Printing conditions may vary with different nozzle diameters.

Note:

• For better part strength and to relieve the residual stress, annealing the parts at 90℃ for 1 hour right after printing.
• PolyMaker™ PC-ABS needs be dried before printed if it has been stored in air for long time be dried before printed if it has been stored in air for long time. 

Making 3D Possible!

• Polymaker™ PC-ABS_TDS_EN_V4.1
• Polymaker_PC-ABS_PIS_EN_V2