Polymaker
Polymaker PolySupport 1.75mm
We have 3 in stock.
Polymaker PolySupport 1.75mm
White / 750g
EC3D Winkel - Maarssen, Utrecht
Gageldijk 2
Unit B2
3602 AL Maarssen
Netherlands
PolySupport™ is a break away support for Polymaker PLA based filaments. It has a perfect interface with PLA, strong enough to support it while easily removable by hand, in 9 out of 10 support applications it’s the quickest and easiest option. PolySupport™ is also compatible with TPU, PC and PVB based materials from the Polymaker portfolio.
HOW SHOULD I USE POLYSUPPORT™?
PolySupport™ is a breakaway support, so it requires mechanical removal.
CAN I USE POLYSUPPORT™ WITH OTHER MATERIALS THAN PLA?
We have designed PolySupport™ specifically for PLA. However, we had positive customer feedback on using PolySupport™ with PolySmooth™, PolyCast™.
RECOMMENDED PRINTING CONDITIONS:
- Nozzle temperature - 220 - 230 (°C)
- Build Surface material - BuildTak®, Blue Tape
- Build surface treatment - None
- Build plate temperature - 25 - 60 (°C)
- Cooling fan Turned - on
- Printing speed - 20-40 (mm/s)
- Raft separation distance - 0 (mm)
- Retraction distance - 1 (mm)
- Retraction speed - 20 (mm/s)
- Recommended environmental temperature - Room temperature
Note: Based on 0.4 mm nozzle and Simplify 3D v.3.1. Printing conditions may vary with different nozzle diameters.
It is highly recommended to use the PolyBox™ when printing with PolyDissolve™ S1 and to store it in the resealable bag.
Making 3D Possible!
