![Sunlu FilaDryer S2](http://ec3d.nl/cdn/shop/files/S2Dryerbox01.png?v=1714994784&width=1281)
![Sunlu FilaDryer S2](http://ec3d.nl/cdn/shop/files/S2Dryerbox03.png?v=1714994784&width=1500)
![Sunlu FilaDryer S2](http://ec3d.nl/cdn/shop/files/S2Dryerbox02.jpg?v=1714994784&width=1500)
![Sunlu FilaDryer S2](http://ec3d.nl/cdn/shop/files/S2Dryerbox04.png?v=1714994764&width=1500)
![Sunlu FilaDryer S2](http://ec3d.nl/cdn/shop/files/S2Dryerbox05.png?v=1714994764&width=1500)
![Sunlu FilaDryer S2](http://ec3d.nl/cdn/shop/files/S2Dryerbox06.png?v=1714994764&width=1500)
Sunlu
Sunlu FilaDryer S2
We have 68 in stock.
Sunlu FilaDryer S2
EC3D Winkel - Maarssen, Utrecht
Gageldijk 2
Unit B2
3602 AL Maarssen
Netherlands
The Sunlu FilaDryer S2 drying system is a device which allows you to prepare any filament for printing in a convenient and quick way. FilaDryer S2 has been built to handle any type of material, from PLA to extremely hygroscopic materials such as BVOH and Nylon, without any problems.
HIGHLIGHTS:
- Dry your filament for optimal performance
- Precise temperature control with double heating element structure
- Large convenient touch screen
- Adjustable temperature between 35-70°C
- Timer can be set between 1-99 hours
- Power supply included
Sunlu device, enabling the appropriate preparation of the filament for the printing process. The main task of the FilaDryer S2 is to remove moisture that may accumulate on the printing material over time. It causes, among others adhesion problems of layers. FilaDryer S2 also allows the storage of thermoplastic fibres in appropriate conditions.
SIMPLE OPERATION
The Sunlu FilaDryer S2 is equipped with buttons and a readable display that allows you to set the appropriate temperature and time of operation. The device allows you to store the filament at a temperature of 35 ° C to 70 ° C. The closed chamber protects the printing material against moisture and dust from settling on the fibres. The rotating spool holder allows the filament to be directly fed into the extruder.
ADVANTAGES OF SUNLU FILADRYER S2
- It can be used with a wide range of filaments: PLA, PLA +, Wood, PETG, PVB, ABS, HIPS, PVA, ASA, TPU, PMMA, PA, PC.
- It can be used to dry both the currently used printing material and to store the spools.
- The device is easy to use and modern looking.
- Thanks to the protection of the thermoplastic fibres against moisture, the resulting prints have increased layer adhesion. The surface of the finished models is thus smoother.
FILAMENT DRYING SYSTEM SPECIFICATION
- Product size: 265(L)*118(W)*274(H)mm
- Max coil size: φ210*85mm
- Net weight of product: 1190g
- Filament diameter: 1.75/2.85/3.0mm
- Working humidity: ≤90%
- Working temp: 35°C~70°C
- Input power: AC 100V-240V,50/60HZ
- Output power : DC:24V土1.2V, 2A
- Standby power: 0.05W
- Max working electricity: 1.9A
- Max working power: 48W
- LCD screen size: 3.43*2.87 inch
KIT CONTENTS
- Sunlu FilaDryer S2
- Charger
- Information leaflet
Making 3D Possible!