Polymaker
Polymaker PolyDissolve 1.75mm
We have 5 in stock.
Polymaker PolyDissolve 1.75mm
Natural / 750g
EC3D Winkel - Maarssen, Utrecht
Gageldijk 2
Unit B2
3602 AL Maarssen
Netherlands
PolyDissolve™ S1 is a water dissolvable support material that’s compatible with PLA, TPU, PVB and Nylon filaments from our portfolio. It is specifically engineered to have a perfect interface with these materials, supporting them while printing while also displaying accelerated solubility in room temperature water after printing.
WHAT MATERIAL CAN POLYDISSOLVE™ S1 SUPPORT?
PolyDissolve™ S1 can support PLA, PVB, TPU and Nylon based materials from our portfolio.
HOW LONG DOES IT TAKE FOR POLYDISSOLVE™ S1 TO DISSOLVE?
It can take 6-12hours to fully dissolve depending on your setup.
You can speed up the process:
- By increasing the water temperature
- By changing the water regularly
- By adding a pump to make the water flowing
RECOMMENDED PRINTING CONDITIONS:
- Nozzle temperature - 215 - 225 (°C)
- Build Surface material - BuildTak®, Blue Tape
- Build surface treatment - None
- Build plate temperature - 25 - 60 (°C)
- Cooling fan Turned - on
- Printing speed - 30-40 (mm/s)
- Raft separation distance - 0 (mm)
- Retraction distance - 1 (mm)
- Retraction speed - 20 (mm/s)
- Recommended environmental temperature - Room temperature.
Based on 0.4 mm nozzle and Simplify 3D v.3.1. Printing conditions may vary with different nozzle diameters.
It is highly recommended to use the PolyBox™ when printing with PolyDissolve™ S1 and to store it in the resealable bag.
Making 3D Possible!
