Sunlu Easy ABS 1.75mm

What is SUNLU Easy ABS?

Sunlu adjusted the ratio between the three (Acrylonitrile, Butadiene, Styrene) and added a little SUNLU wisdom into the mix. While the hardness and acid and alkali resistance remain the same, SUNLU have slightly reduced its heat resistance.

The result is a minimum printing temperature of 225 °C and a minimum heating of 70 °C for the base plate.

But E-ABS still maintains the low stress, it should have no cracking or warping!

FEATURES & ADVANTAGES:

• Printing does not need a holding tank, open printer can be used!
• Low shrinkage, print models do not warp or crack!
• Very low odour when printing.
• Filament do not need to dry, very little impact by humidity.
• Balanced physical properties, high strength, good toughness

Note: Printing the bottom 10 square centimetres above the model can raise the temperature of the base plate to 80 ~ 90 degrees.)

 Making 3D Possible!

• Sunlu Easy ABS Technical Data Sheet