







Sunlu
Sunlu Easy ABS 1.75mm
Choose options
What is SUNLU Easy ABS?
Sunlu adjusted the ratio between the three (Acrylonitrile, Butadiene, Styrene) and added a little SUNLU wisdom into the mix. While the hardness and acid and alkali resistance remain the same, SUNLU have slightly reduced its heat resistance.
The result is a minimum printing temperature of 225 °C and a minimum heating of 70 °C for the base plate.
But E-ABS still maintains the low stress, it should have no cracking or warping!
FEATURES & ADVANTAGES:
- Printing does not need a holding tank, open printer can be used!
- Low shrinkage, print models do not warp or crack!
- Very low odour when printing.
- Filament do not need to dry, very little impact by humidity.
- Balanced physical properties, high strength, good toughness
Note: Printing the bottom 10 square centimetres above the model can raise the temperature of the base plate to 80 ~ 90 degrees.)
Together, Layer by Layer!
| Specification | Value |
|---|---|
| Weight | 1.3 kg |
| Brand | Sunlu |
| Build Plate Temperature (max) | 60 - 70 °C |
| Classification | Filament |
| Diameter | 1.75 mm |
| Machine Type | Filament Extrusion |
| Material Type | ABS |
| Nozzle Tempaterature (max) | 225 - 235 °C |
| Packaging Size | 202 x 65 x 202 mm |
| Printing Speed | 40 - 600 mm/s |
| Product Size | 202 x 65 x 202 mm |
| Product Weight | 1 kg |
